There are five reasons for the heavy load operation of the concrete mixing plant

Quick inquiry
I am interested in, the capacity is . This equipment will be used in (area). My name is , my Email is , my phone number is . Please send me detailed quotation list!

Some customers have told us that the long-term use of concrete mixing plant is always the case of heavy-duty operation. What are the reasons for the heavy load operation, and the following five suggestions are intended for the operation and use of the concrete mixer.

1. Concrete mixer according to the required ratio of concrete to determine the amount of water supply, and adjust the time to point to the corresponding water supply time;
2. Mixing motor running concrete mixer start concrete mixer;
3. The concrete mixer closes the unloading door, adding the required mix to the hopper, lifting the hopper. The hopper should run smoothly and freely stop at any position on the track. If there is a slippery phenomenon, you should first put the hopper into the bottom of the pit, and then adjust the brake motor large nut. Hopper to improve the normal, reliable braking back to the mixing tube feeding at the same time start the pump to the mixing cylinder water supply;
4. After stirring the mixer in the concrete mixer 25-35S, start the discharge door discharge;
5. In the above-mentioned test run, the concrete mixer, if found abnormal, should immediately stop checking, troubleshooting, and then in the next test until normal. Concrete mixer new machine running after a day on the liner and other parts of the bolts, nuts all check fastening. Transmission lubrication parts for oil lubrication.

Get Support Or Price