Matters needing attention in lubrication work of engineering concrete mixing station

Quick inquiry
I am interested in, the capacity is . This equipment will be used in (area). My name is , my Email is , my phone number is . Please send me detailed quotation list!

In order to make the parts of the concrete mixing station reach good lubrication, we must pay attention to the following points:
1) in accordance with the provisions of the engineering concrete mixing station parts lubrication instructions, to each part of the mixing station on schedule and on time to add appropriate viscosity of lubricating oil.
2) the quantity of lubricating oil must be kept sufficient, and the oil layer added to the tank or oil tank shall reach the water indicated by the mooring mark. Added to the high speed rolling bearings in the oil should be appropriate, not too much or too little, otherwise it will heat damage.
3) the lubricating oil must be clean and clean, with no dirt, dust, dirt or moisture, etc., to prevent damage to the lubrication and damage to the parts and surfaces of the concrete mixing plant.
4) the oil in the oil tank and tank shall be changed regularly according to the instructions of the parts of the mixing station. When you change oil, you must clean the oil tank with kerosene.
5) oil eye, oil must be kept closed Kai, to prevent dust and debris into the thick and cooling.

Get Support Or Price